elife700 is a biphasic Monitor/Defibrillator for advanced monitoring and resuscitation functions.
elife700 incorporates a wide screen displaying ECG signal, monitoring parameters, information and user guide messages.
Monitoring function allows 4.5 seconds visualization (9 in cascaded mode) of the patient’s ECG picked up via of 3, 5 and 10 lead patient cable, reusable external paddles or multifunction disposable electrodes.
elife700 has a user-configurable high resolution thermal recorder, for printing waveforms and notes relating to the utilization.
The unit can operate with NiMH rechargeable batteries, connected to a supply AC mains or connected to a car battery.
The remaining battery capacity is displayed in the top part of the screen. When the device is connected to an external power supply (AC mains or car battery) the battery is charged, by means of an internal charger, independently of whether the device is switched on or off.
elife700 is available in two versions:
elife700 provides a defibrillation shock by means of an truncated exponential type biphasic pulse. The energy of this pulse is transmitted to the patient via external reusable paddles or multifunction disposable electrodes that connect to the device and to the bare chest of the patient.
When operating in Synchronized Cardioversion mode, biphasic defibrillation shock can be synchronized with the R wave of the patient’s ECG.
In the Manual version, defibrillation shock can be simply applied by three steps: (1) select the energy, (2) charge, (3) shock.
Manual & AED Version
In manual/AED version elife700 analyzes ECG of the patient, and determines if the rhythm analyzed can be defibrillated. During the whole process, the device displays on-screen text messages, and provides audible messages by means of a loudspeaker situated in its front part.
In AED mode, all information are automatically stored in a Compact Flash Card, including ECG signal, clinical parameters and alarms; the last 100 events of defibrillation, pacing or printing are also memorised.
All information can be easily downloaded and analysed on PC.
Each version can be equipped with the following options:
Integrated pacemaker for external stimulation both fixed or on demand.
This option adds to the unit cardiac pacing features, with programmable stimulation rate and current.
Pulse Oximetry Option
Pulse oximetry with SIMS BCI transducer.
This option offers oxygen saturation monitoring by displaying on the screen the percentage value of SpO2 and the plethysmographic waveform, in combination with HR value and electrocardiographic waveforms.
Available 30 days from order date. For the full technical specification on the elife700 click here